amidst no profiles found что делать
Error: No profiles found #342
Comments
dima74 commented Aug 25, 2017
I have linux with java 1.8.0_141.
I installed minecraft and create profile for 1.12 (without mods and without optifine).
I launched this profile and played few seconds in 1.12 world.
I downloaded and ran amidst v4.3-beta2, and receive error «No profiles found»:
I understand, that if you perform the same actions, that most likely you don’t get error. But can you try to guess, please, what i did wrong? Thanks a lot!
The text was updated successfully, but these errors were encountered:
MattSturgeon commented Aug 26, 2017
Without looking into the code, I’d be suspicious of whether the unicode characters in your username/home directory cause an issue. Perhaps amidst is setup to only work with ASCII for paths?
MattSturgeon commented Aug 26, 2017
It could also be an incompatibility with the new Minecraft launcher, since AFAIK it stores profiles differently to the old one.
For either of my suggestions I would have expected to see more bug reports though.
dima74 commented Aug 26, 2017
Ilnene commented Mar 10, 2019
Could you show me how you did it? Thanks. I have the same issue
dima74 commented Mar 10, 2019
@Ilnene afair you just need to create this file (
(replace 1.12 with your minecraft version)
amerikos170 commented Dec 25, 2019
Здравствуйте помогите пожалуйста я не могу понять почему у меня не показывает версии игры вот мой скриншот 
amerikos170 commented Dec 27, 2019
Еслить ли техподдержка у этой программы?
hatkidchan commented Dec 28, 2019
Здравствуйте помогите пожалуйста я не могу понять почему у меня не показывает версии игры вот мой скриншот
Чувак, разрабы не понимают по-русски. Поэтому отвечу я. Если юзаешь тлаунчер, попробуй вручную создать конфиг профилей. Комментарий выше как раз об этом.
Dude, devs aren’t understand russian. Soo.. I’m answering now. If you using TL, then try to create profiles config by hands. Comment above is about this.
aleckeyy commented Jan 16, 2020
Hey, man.
Could you show me how to create the new file for minecraft pirate? Please
luan661 commented Feb 8, 2020
Obrigado meu chapa! Funcionou perfeitamente! (minecraft 1.15.2)
liapapaq commented Feb 25, 2020
Здравствуйте помогите пожалуйста я не могу понять почему у меня не показывает версии игры вот мой скриншот
Чувак, разрабы не понимают по-русски. Поэтому отвечу я. Если юзаешь тлаунчер, попробуй вручную создать конфиг профилей. Комментарий выше как раз об этом.
liapapaq commented Feb 25, 2020
@undefinedvalue0103 прочитайте пожалуйста сообщение выше
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Amidst Failing to load versions #502
Comments
Kelambrad commented Jun 25, 2019
As of 25/06/19, Amidst wont detect the versions.
I think its to do with the new updated launcher.
The text was updated successfully, but these errors were encountered:
Master00Maniac commented Jun 25, 2019
I’m also having this issue. Previously, when I could choose which launcher to use, switching to the beta launcher would cause Amidst (beta 6) to be unable to see my 1.14 profiles. Switching back resolved the issue at the time, but that beta launcher is no longer opt-in, and thus I cannot resolve the issue by switching back now.
moulins commented Jun 25, 2019
What do you mean exactly by «won’t detect the versions»? Does Amidst crash with an error message or is the profile list simply empty?
Kelambrad commented Jun 25, 2019 •
It displays the instances you have made inside the Minecraft Launcher, For me I have an instance for a few different versions of minecraft. Where it would say the version, it says ‘Not found’ with a red box, and ill add this wasn’t an issue before the launcher upd 
ated. Maybe the launcher update changed something?
archiesholland commented Jun 25, 2019 •
This is the error I’m getting. Note that I also have 1.13.2 available, so I’m
able to access the log messages.
iainwb commented Jun 26, 2019
This is because the version string for 1.14.3 has not been added to the code.
Kelambrad commented Jun 26, 2019
Makes some sense to why it wouldn’t, work but It does the same red box not found for all my versions of minecraft, super odd
Found profile selection, but unable to locate minecraft.jar.
I only have one profile. In the profile I have 1.6.4. Minecraft is installed in the default directory. (
/.minecraft) I am using AMIDST v3.4. This is on a MacBook Pro running OS X 10.8.2. AMIDST is in the /Applications folder. (I tried putting AMIDST in
/.minecraft/versions/1.6.4 and running it from there. Got the same error. Also got the same error when run from the
Comments (10)
(The above was done using the AMIDST.app. I also tried running AMIDST.jar from the
/Downloads folder, and I got the same error.
I also got the same error when running AMIDST.app from
(anonymous and me are one and the same)
Also I am running java 7 update 40.
Does this still happen with AMIDST 3.5-beta-1?
Yes, happen with all new versions of AMIDST
I don’t use MacOs, I use Windows7 and the message shown in the new version is «Unable to open launch_profiles.json» but in older versions is «Found profile selection, but unable to locate minecraft.jar.»
Did you follow my instructions from my last reply?
Yes and still I continue having the same problem
Minecraft Forums
NOTICE: This version of Amidst is out of date, and no longer being maintained. A newer version of this program can be found here: http://www.minecraftforum.net/forums/mapping-and-modding/minecraft-tools/2626547
AMIDST Project Formerly Minecraft Stronghold Finder
Advanced Minecraft Interface and Data/Structure Tracking
About
AMIDST is designed to help enhance the process of finding structures, biomes, and players in minecraft.
By accessing your minecraft files, it’s able to draw the biomes of the world out and show where points of interest are likely to be.
What AMIDST can do.
— Find Strongholds
— Find Villages
— Find Witch huts
— Find Temples
— Find Player Spawn
— Map Biomes
— Move Players
— Save an image of the map
— Load map data from different versions of Minecraft.
What AMIDST can’t do.
— Show modifications to the world.
— Give information on individual blocks.
READ ME
[INFO] 57Digital appears to have made an iOS verison of this! (iTunes link)
[BUG] Spawn points, v illages, temples, and witch huts may be slightly less accurate than normal.
[BUG] Moving your player on the map WILL put you into the sky. It is unclear on how to fix this issue.
[INFO] AMIDST uses Google Analytics to anonymously gather general statistics.
[INFO] AMIDST attempts to check for updates each launch.
[INFO] AMIDST is now completely open-source. Check it out on GitHub.
BUG REPORTING
Please report all bugs with as much detail as possible to the issue tracker.
Feel free to also make a post, or send me an email at: [email protected]
Please note: I am unable to create Mac builds for the moment. I suggest using the Linux version as a Mac user. The current link may be broken.
3.6
Since there were quite a few, I’ve grouped them a bit. (Hopefully I don’t miss any)
Major Changes:
— AMIDST is now under GPL v3
— Completely reworked the profile selector.
— Added automatic seed histories. If AMIDST detects a «history.txt» file next to it, it will write a time stamp followed by the seed for each seed you enter.
— Added smooth fragment fading. (This may be disabled in the options menu) Enabling this will cause all fragments to fade in when loaded.
— Most crashes now create a «crash dialog» containing a log that can easily be pasted.
— A licenses window has been added to the help menu. This will contain all relevant license information for AMIDST and its libraries.
— Added option to set the default world type to any of the world types or «prompt each time».
— Switching maps no longer eats up extra memory. (This will be a huge improvement in memory/processing performance when loading new maps)
— Rendering speeds have been vastly improved.
— Fixed issue where files would not be properly closed.
Minor Changes/Fixes:
— Hidden files/folders now show when opening a world from a file/folder.
— Added 1.7.4 to official version list.
— A new option is availible in the Options menu called «Show Debug Info». Enabling this will add a small panel to the map viewer containing debug information on fragments.
— Library loading now follows OS rules correctly. (This should fix a number of errors with loading)
— AMIDST now returns «4» on crashes. This will change at a later date to include various error codes.
— Mac OS X users should no longer experience the «corrupted» issue.
Biome Color Profiles:
Overview: This was something that was added in 3.5, but I’ve improved on a bit for 3.6. Color profiles let you set what color each biome shows up as. To activate them, simply create a folder named «biome» next to AMIDST. After launching AMIDST again, a new file should appear in that folder called «default.js». It will contain the default options for a color profile. You may edit this directly, or create new color profiles within the folder (following the same design as default.js). Any subdirectories will show up as sub-menus. (There is also support for shortcuts, as mentioned in this post)
— Added support for biome nicknames. (Example: [ «Ice Plains», < "alias":"Really cold place", "r":255, "g":255, "b":255 >] )
— Duplicate biome colors are now supported.
— default.json is not much cleaner.
— Biome profiles no longer cause an empty profile list when there’s a syntax error.
— A new menu option for reloading your list of biome color profiles has been added.
3.5
— Fixed issue where some Mac OS X users would not have their window refresh.
— Fixed loading from amplified worlds.
— Fixed the map jumping around when a menu was opened.
— Selecting the default profile will now attempt to load 1.7.2.
— Adjusted the organization of some menus.
— Added 1.7.2 to official version list.
— AMIDST will now only load the libraries specified by the selected version.
— Added support for biome color profiles. An explanation of this will later be added to the wiki. Until then, please use check the latest forums posts or ask around.
— Basic wiki page added to BitBucket here.
— Mac OS X version now launches with extra memory.
3.3
— Increased performance for filling in image data.
— Slightly reduce memory usage for structure generation.
— Added official support for 13w37b.
— Reduced memory usage from grid layer.
— Increased performance for drawing biome layer.
— Added FPS counter.
— Improved detection of multiplayer maps.
— Major performance improvements for zoomed out maps.
— Added spawn location icon.
— Added option to toggle framerate panel in the menus.
— Added official support for 13w38a/1.6.4.
— (Default) now selects 1.6.4
Older versions
All versions of AMIDST 3+ are available for download at: https://github.com/s. AMIDST/releases
Special thanks
A big thanks to the people over at http://www.57digital.co.uk/ for their very generous support.
Supporting the project
Aside from using adf.ly, there are a few ways you can help improve AMIDST.
Check out the GitHub page. Bug submissions, feature suggestions, and any improvements to the source code are always welcome.
Due to requests, I have now added a donation link back in. 
Media
A video tutorial on v3.0 will be up eventually. Until then, here are some screenshots:
Outdated Versions
If you are interested in the old Minecraft Stronghold Finder, all the old information can be found here:
Downloads & Versions No point in reading this if you don’t download it!
Version 1.4.1
Download EXE or JAR
The EXE version now works!
Changes:
-Updated for 1.9-pre4!
-Fixed a bug where it sometimes wouldn’t work.
Older Versions:
Version 0.4.2
Download ad free (JAR) (EXE)
Download through adf.ly (JAR) (EXE)
Changes:
-Should work with 1.9-pre 3. Officially.
Changes:
-Fixed several memory leaks that forced the program to stop working after awhile.
-Made a few things use way less memory.
-Fixed a bug that would prevent any villages/markers from being accurate when a X/Z offset was used.
Changes:
-Supports searching for nether-structures.
-Automatically saves your preferences.
-Changed icon for strongholds so they’re more noticeable.
-Added zoom in/out button to the map.
-Mouse wheel also zooms in/out on the map.
-Changed the title to reflect the current version ;P
Version 1.0-beta
Download EXE or JAR
Changes:
-Added a biome map.
-Added searching for villages.
-New UI
-More options
-List of stuff.
-I dunno, I spent way too many hours working on this, and now I’m tired.
Version 0.5
Download through adf.ly
(Non-adf.ly version will be available within a day or two— I just wanted to test something, I hope no one hates me for it D: )
Changes:
-NOW WORKS WITH 1.9! Besides that, it’s the same-old 
Changes:
-(0.4.2) Fixed a UI bug that would make this application useless in Mac OS X.
-(0.4.1) Negative numbers now work! (Sorry about that!)
Changes:
-Now is incredibly accurate! You should just be able to dig down. However, in rare cases you’ll end up between the walls, just dig to the side or something.
-Added support for the «invalid biome» issue. So it’ll at least tell you that there’s no stronghold there.
-A reminder from the last version (Which was only out a day) seeds like «poppycock» will now be properly read!
Changes:
-Added support for non-number seeds. (i.e. if your seed was «watermelon» it was now correctly convert to a number as it would in minecraft) WARNING: Don’t accidentally have a space in your seed number! It will mess things up!
Version 0.2
Download
Changes:
-Changed labels of stronghold 2/3 so they actually display the right numbers.
-Greatly changed the formula for finding the second and third stronghold. This should be MUCH more accurate for both of those.
-Added my name to the top!
Version 0.1
Download
Bugs:
-I’ve only tested the first stronghold coordinates, the other two will probably NOT be accurate.
-Occasionally the coordinate won’t be accurate. (It’s pretty rare)
Original topic is here. Additionally, the download to AMIDST v2.1 can be found here:
Error when loading 1.16.1 profile #857
Comments
WhyIsEveryUsernameIsAlreadyTaken commented Aug 18, 2020
[info] Amidst v4.5
[info] Current system time: 2020-08-18 16:32:20.191
[info] System.getProperty(«os.name») == ‘Linux’
[info] System.getProperty(«os.version») == ‘5.7.9-1-MANJARO’
[info] System.getProperty(«os.arch») == ‘amd64’
[info] System.getProperty(«java.version») == ‘1.8.0_252’
[info] System.getProperty(«java.vendor») == ‘Oracle Corporation’
[info] System.getProperty(«sun.arch.data.model») == ’64’
[info] Not using OpenGL.
[info] Biome profile activated: Default
[info] Using look & feel: javax.swing.plaf.metal.MetalLookAndFeel
[info] using ‘.minecraft’ directory at: ‘/home/alex/.minecraft’
[info] using biome profiles at: ‘biome’
[info] Starting to download remote version list.
[info] Scanning for profiles.
[info] Successfully loaded profile list.
[warning] java.io.FileNotFoundException: cannot find valid version directory for launcher profile ‘Fabric Loader w/ Optifine’
at amidst.mojangapi.file.service.DotMinecraftDirectoryService.createValidVersionDirectory(DotMinecraftDirectoryService.java:154)
at amidst.mojangapi.file.UnresolvedLauncherProfile.resolveToVanilla(UnresolvedLauncherProfile.java:59)
at amidst.gui.profileselect.LocalProfileComponent.tryResolve(LocalProfileComponent.java:97)
at amidst.threading.WorkerExecutor.lambda$run$9(WorkerExecutor.java:71)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
[info] There are no updates available.
[info] Successfully loaded remote version list.
[warning] java.io.FileNotFoundException: cannot find valid version directory for launcher profile ‘Fabric Loader w/ Optifine’
at amidst.mojangapi.file.service.DotMinecraftDirectoryService.createValidVersionDirectory(DotMinecraftDirectoryService.java:154)
at amidst.mojangapi.file.UnresolvedLauncherProfile.resolveToVanilla(UnresolvedLauncherProfile.java:59)
at amidst.gui.profileselect.LocalProfileComponent.tryResolve(LocalProfileComponent.java:97)
at amidst.threading.WorkerExecutor.lambda$run$9(WorkerExecutor.java:71)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
The text was updated successfully, but these errors were encountered: