could not find any flp project file in this zipped archive что делать
Logic board
Восстановление FLP файлов 
Думал, что проект потерян навсегда. После поисков в интернете выяснилось, что данная проблема имела место не только у меня и нашел ее решение.
grigoryprometey.ucoz.com
Вот проблема номер 2 и ее решение
Нижеприведенные действия стоит производить в специальных HEX-редакторах (таких имеется большое множество).
46 4C 68 64 06 00 00 00 00 00 04 00 60 00 46 4C ; FLhd. `.FL
64 74 00 00 00 00 C7 06 35 2E 30 2E 31 00 C8 10 ; dt. Ç.5.0.1.È.
46 4C 68 64 06 00 00 00 00 00 04 00 60 00 46 4C ; FLhd. `.FL
64 74 B1 77 00 00 C7 06 35 2E 30 2E 31 00 C8 10 ; dt±w..Ç.5.0.1.È.
grigoryprometey.ucoz.com
An error occured while reading the FLP file. This file my be corrupt or some plugin caused an error while opening.
Думал, что проект потерян навсегда. После поисков в интернете выяснилось, что данная проблема имела место не только у меня и нашел ее решение.
Та же беда.
проекты были случайно удалены с винта. файлы реинкарнировал, но работать проэкты отказываются.
Все возможные манипуляции с программами по востановлению пробовал..безрезультатно:(
помогите пожалуйста вылечить ФЛП-шки:
http://rghost.ru/46059175
пароль 0000
мое мыло для ответа:
MEMFIS_AKA@meta.ua
denisdnepr, со слайсеком не работал, но думаю, что это не нужно. У тебя должен быть открыт канал с сэмплом. Открой степ-секвесор, нажми на кнопку канала, в котором открыт сэмпл. Открывается окно настроек канала. Вверху, под четырьмя кнопками написано название звукового файла (сэмпл), а слева от названия значок папки. Нажми его, откроется папка, где находится сэмпл. Если папка не открылась, или в ней нет нужного файла, значит что-то произошло. Или случайно удалил, или переместил в другую папку, или переименовал. Теперь нужно найти этот файл (может он в корзине, или под другим именем) и щелкнуть по нему.
jdoblom
Could not find any flp project file in this zipped archive что делать
Forum rules
POSTS HERE ARE PRIVATE. INSTRUCTIONS BELOW:
ALL posts made in this forum are ‘ Private‘ so that only you and staff can see them. This allows sharing of personal data, projects and other information. Posts are generally made public after they are marked ‘Solved’ AND there was no personal data contained in them. If you don’t want your post made public let the team know.
We know it’s frustrating when things don’t work. However, please help us to help you by following these suggestions:
Could not save to the file *.flp
I am having a recurring problem. It’s a real big deal this one. I’ve lost projects a few times because of it. May be a Windows 10 issue rather than an FL one, but any help would be massively appreciated.
For some reason (seemingly sporadically, I can’t work out what is changing or any variable that could be affecting). I am sometimes getting the error message «Could not save to *.flp»
This is also making FL unstable (like the playlist window is freezing up, I’m getting glitched bits of drop down menus stuck on screen after the menu should have closed etc).
I have my hard drive and all its sub folders set to full permissions for all users.
» and a 0kb file size.
I don’t want to close my current project and lose it, but I can’t save it. Also this just seems to happen randomly so I’m basically scared to get deep into any project at all and just have my write permission all of a sudden disappear. Please please help, I am tearing my hair out!
Разархивирование zip архива
Хотел распаковать архив, ошибка
Прошу прощения, но не понял) Выполнил, ответ:
И попытайтесь их распаковать.
Что за дистрибутив? Версия? Откуда ставили zip?
This is Zip 2.32 (June 19th 2006), by Info-ZIP.
Compiled with gcc 4.1.2 20060613 (prerelease) (Debian 4.1.1-5) for Unix (Linux ELF) on Jul 6 2006.
Это и правда Debian 4 «Etch»?
Возможности найти более новый zip/другую машину с более новым ПО нет?
другую машину с более новым ПО
В данный момент нету.
Попытайтесь поставить zip из текущего stable. Надежда на то, что заработает, есть, но слабая. Не забудьте заранее обзавестись deb’ами со старыми версиями софта, чтобы потом поставить его обратно. Если потребует обновить libc6, не соглашайтесь.
Архив очень большой? Если около мегабайта, я бы мог скачать, (попытаться) починить, перепаковать в tgz и залить обратно.
Fatal error: Class ‘ZipArchive’ not found in
I have a problem that I install ‘Archive_Zip 0.1.1’ on Linux server, but when I try to run the script to create the zip file it gives the fatal error
where I put the code
but it doesn’t find the class file.
Please tell me the solution. What should I do to resolve the problem? I also put php.ini file to the folder where script is, but it does not work.
23 Answers 23
For the ZipArchive class to be present, PHP needs to have the zip extension installed.
See this page for installation instructions (both Linux and Windows).
On Amazon ec2 with Ubuntu + nginx + php7, I had the same issues, solved it using:
sudo apt-get install php7.0-zip
On ubuntu desktop, I had to do.
This installed the library but I still kept on getting the same error, so I had to restart apache using:
I’m not seeing it here, so I’d like to add that on Debian/Ubuntu you may need to enable the extension after installing the relative package. So:
First of all, The solution for remote server:
If you are using cpanel you may have zip extension installed but not activate. You need to active it. For this case you need to go to cpanel > inside software section > click on PHP version. Then find zip and check it. Now save.
You should see like the image. 
Refresh page. The error should disappear.
Note: If you dont found, contact server provider. They will install for you.
Centos 6
Or any RHEL-based flavors
If you have WHM available it is easier.
Log in to WHM.
Go to EasyApache 4 (or whatever version u have) under Software tab.
Under Currently Installed Packages click Customize.
Go to PHP Extensions, in search type «zip» (without quotes),
you should see 3 modules
click blue button few times to finish the process.
This worked for me. Thankfully I’ve WHM available.
You also need to compile PHP with zip support. The manual says the following:
It’s not enough to simply install the correct extensions on the server. Have a look at the installation instructions link Pekka posted earlier. My answer is just a clarification of his.
and no need to restart php7.0-fpm manually.
Creating config file /etc/php/7.0/mods-available/zip.ini with new version
Processing triggers for php7.0-fpm ( 7.0.11-1+deb.sury.org
add-apt-repository fails on Error: could not find a distribution template for Elementary/next #136
Comments
AlexMikhalev commented Sep 7, 2020
Every attempt to add repository (even via dpkg install dropbox or vscode) fails with error above as Elementary/Next isn’t in distribution template.
Changing /etc/lsb-release didn’t help as lsb_release still returns Elementary/Next
My understanding Elementary should present itself as ubuntu/focal to external repos, looking forward to set it up properly.
The text was updated successfully, but these errors were encountered:
AJ552 commented Sep 25, 2020
I’ve solved the problem in this way:
(you can copy the text I wrote you above)
then save it with ctrl+O and close it with ctrl+X
3) After this you should see another text file opened in nano.
This file you have to modify it as follows:
(as before you can copy the text I wrote above)
then save it and close it as usually with ctrl+O and ctrl+X
4) Type ‘reboot’ to rebooting system and applying the modifies.
5) Repeat commands you were trying to execute and check if they works this time.
I hope I was helpful!
cassidyjames commented Oct 29, 2020
I believe this should be handled in os-patches. @tintou can yell at me if I’m wrong. 😂
AlexMikhalev commented Oct 30, 2020
tintou commented Oct 30, 2020
Yes, this was previously handled by a patch. We can reapply the patch right before releasing elementary 6 if necessary.
stsdc commented Jan 26, 2021
Still happens in recent builds:
It is troublesome, because I want to prepare my app for the Odin and need to install some software.
pongloongyeat commented Jan 30, 2021 •
@cassidyjames you may want to add this to the Odin 6.0 project board so it doesn’t get forgotten before release ;p
maxie7 commented Feb 19, 2021 •
AlexMikhalev commented Feb 21, 2021
@cassidyjames @pongloongyeat fellows it may seem like a minor thing to you, but this is a reason I completely switched to PopOS for my main laptop, despite being a backer (github sponsor) for elementary os.
pongloongyeat commented Feb 21, 2021 •
@AlexMikhalev I’ve never used eOS 5 but from the comments above it seems that this was working on 5.0. Unfortunately, this is an issue on 6.0, which isn’t a stable release as of yet.