hosting dedicated servers using client files has been deprecated since june 2019 unturned что делать

Hosting dedicated servers using client files has been deprecated since june 2019 unturned что делать

How to find the Unturned files:

1. Open the your library of games in Steam.

2. Right-click Unturned and click «properties»

3. Go to the «Local Files» tab and click «browse local files»

This is for after you find the file location:

1. Right click the Unturned.exe that is in the folder

2. Make a shortcut of it

3. Right-click the short cut and go to properties

4. Delete the «target» and put: «C:\Program Files (x86)\Steam\steamapps\common\Unturned\Unturned.exe» nographics batchmode +secureserver/Server

6. after it says «loading level: 100%» close it

After following the past steps you should get a new folder called «Servers» :

2. open the folder inside that has the name of your server

3. open the «sever» folder

4. open «Comands.dat» with notepad

5. type the following (select one of the items in parenthesis and brackets are for extra information ) :

name (name the server here)

pvp (if not leave blank)

mode (Easy, Normal, Hard)

cheats (enabled or leave blank for no cheats)

6. save and exit this file

7. go back to the shortcut

8 (optional). move the shortcut to the desktop

9. open the shortcut (which is now the server) and let it load

10. Have fun on your sever

Notes (Read before commenting a problem):
*WILL NOT WORK UNLESS YOU ARE BOTH ON THE SAME WIFI
*If you only see a black screen wait for the words to start popping up if they don’t you have done something wrong.
*When changing difficulty it will not work if anyone has ever logged into your server.
*Good internet is suggested for logging on.

I WILL NOT RESPOND TO COMMENTS VERY QUICKLY. PLEASE BE PATIENT. THIS IS STILL 100% WORKING AND I WILL RESPOND HOWEVER IT MAY TAKE A WHILE.

Источник

Hosting a Dedicated Server

A Dedicated Server is a method of hosting an Unturned server that does not require the host to be an active player in the game. The host can choose to play on the server, or just leave it running in the background while others play on it. Unlike a Local Server, port forwarding is required. Servers are hosted with the Unturned Dedicated Server app.

A Dedicated Server also allows for vastly increased versatility in configuration of the server. Many server options become available through the Commands.dat, Config.json, server console, and other configuration files.

Contents

Windows Setup:

Shortcut Method (pre-3.20.12.2 only)

The deprecated shortcut method for creating servers only works for versions of the game prior to 3.20.12.2, which had been released on October 14, 2020. Newer versions of the game should only be hosted through the Unturned Dedicated Server app.

How to Host a Dedicated server on Unturned Version 3.0 Above

An example of a finished «Target» field:

4. Finally, run the server. A black console screen should appear. 5. Optional: You can easily update an existing Unturned server by using the following method:

The following text string will create a shortcut that will automatically update your server. This example assumes that you installed your server through SteamCMD, which does not update Unturned automatically.

Classic Setup:

To finish, simply apply changes to the shortcut and double-click it to run it. The game should run and then immediately go to a gray screen. This screen means the server is running fine. If your screen doesn’t go gray and the server does not work, make sure you put the -sv option at the end of your options, otherwise the server may not work.

MacOS Setup:

With Unturned 3.0, the procedure is exactly the same, but after the parameters, you need to add: +secureserver/servername

Replace «secureserver» with «lanserver» if you want a LAN server instead. Replace «servername» with what you want to name your server.

Linux Setup:

New Guide

Go to the install folder and right click and press open in terminal.

press the following

Replace XX with the name of the architecture (x86 if you have a 32 bit computer, x86_64 if 64 bit)

Headless Guide

Note: This is mainly for computers without a GUI (graphical user interface), or if you only have access to the terminal/command line. If you use a VPS with only SSH/PuTTY access, go right ahead! If you are using a GUI, the above option might be better for you, however you might have some slight memory benefits using this method.

To update in Fedora, use

while on Ubuntu, use

The «Add Architecture» is only needed once; to update your system, only the other two is required afterwards.

If on Fedora, you do not have access to dnf, try using yum instead.

Now for installing the libraries. On Fedora, run

If you have an Nvidia GPU, also use

If you only have an Intel Graphic Chipset, or you don’t know what graphics you have, use

For Ubuntu, type each individual line, then hit return. You should have typed in four statements.

If your Fedora/Redhat server throws an architecture error, try adding —setopt=protected_multilib=false to resolve the issue temporarily.

At this time, you will need a steam account. To avoid conflict, create a new dummy Steam account with Unturned added to its library.

There are a lot of things to say here, but I recommend creating a new user similar to the instructions in the old guide. Look at the «Running the Server» part, and ONLY do the first step (two commands).

Most of these steps are going to be the same for Ubuntu/Fedora/Debian/RHEL/CentOS, unless said.

First, let’s create some folders and download SteamCMD.

We need the RocketLauncher to start the server, so we will download it.

If you want RocketMod on your server as well:

You may now remove any excess files, other than start.sh, update.sh, unturned/, steamcmd/, or Steam/.

Now, using an editor of choice (Vi or Nano), open update.sh.

Here is where your Steam account that you created earlier is used. Put the username and password in there. If you want to keep your password private, keep the password string blank.

File installation

A short-term testing method is to use WinSCP or a similar SFTP software to transfer the entire Unturned folder over to the Linux server. The folder is likely located in C:\Program Files (x86)\Steam\SteamApps\common\. The problem with this option is that you must update the server files with WinSCP every time an update is released.

A better option is to use SteamCMD, which is a light-weight Linux Steam client that downloads and updates the required Unturned files.

Running the server

Configuring your Server:

Setup Commands

Use the Commands file if you want to run list of commands that will run each time the server starts. Use a separate line for each command.

The Setup Commands are as follows:

Command Line Options

These parameters are used in launching the server from a command line interface. The order of inputted commands do not matter.

Config.json file

The Config.json file offers a lot of control over the actual server gameplay. It is located in:

It can be edited in the same manner as the commands.dat file. It is in JavaScript Object Notation format, meaning that it is a simple list that connects one string to a variable. In more simple terms, you should only edit text that is within «quotation marks» and after a : colon. Any value that is before the colon is specific to the game and it WILL break your server if you change it.

Connecting:

You should now be able to connect to your own server by running the game through Steam. To do this, click «Play», and then «Connect», and in the IP field, type «localhost», then click «Connect» to join your own server.

If you fail to connect to your own server, try installing SteamVR (found under tools in Steam).

Note: Other players will not use «localhost», only you will. Other players will use your EXTERNAL IP to connect to your server. Find your external IP by visiting a site such as WhatIsMyIP.

Firewall

If you have correctly set up your server and can’t even connect to it, you might want to check if your firewall is blocking the port. On Windows, it shouldn’t be that hard; open Control Panel, Security, and click «Allow a Program». Here, you can choose the Unturned application, and voila!

For MacOS, open System Preferences. Go to Security and Privacy, Firewall, then unlock the settings via the padlock at the bottom left of the window. Next, go to Firewall Options, scroll down the list, click on Unturned, and on the right of it, make sure it says «Allow incoming connections». If not, click on it, and choose that option. Close the window, making sure to apply settings, padlock the settings, and you’re done!

For both, if you selected a different port via the start command or Commands.dat, change the first number to the port you selected, and the second port two ports ahead (ex. 27040-27042).

Port Forwarding:

NOTE: Port Forwarding has to be done carefully. Nobody will be able to connect to your server if you do this incorrectly.

In order for anyone to access the server you’ve set up, you need to go into your router’s settings and open the server’s set ports.

You will need the following information which can be retrieved from your router (usually a sticker on the side):

To find your local IP address, follow these steps (Windows):

Follow the steps below (these might not be the exact field names, you will have to look for something similar in context):

Below is an example of a completed port forwarding rule.

If you are unable to locate these things, try checking https://portforward.com/router.htm to see specific instructions for your router.

Alternatively, you can put your hosting system into the DMZ. This opens all ports and is an option if for some reason normal port-forwarding fails. Putting your system into the DMZ opens up numerous security vulnerabilities and should only be used as a last resort!

Источник

Hosting dedicated servers using client files has been deprecated since june 2019 unturned что делать

Been trying to get a vanilla server running for the past couple of hours, ran into a snag. Even though the default ports are open, no packets are being sent to the server. It’s almost like the server is failing to accept connections. I have my command.dat set appropriately as well. All google searches are coming up with no working solutions, so I thought I’d take to the forums.

I am only able to connect to the server through localhost/the other computers on my home network. No external connections are going through.

— Yes, my IP is static.
— Yes, I have verified that the ports are indeed open and that my ISP is not blocking them
— Yes, I have reinstalled unturned multiple times
— Yes, I have tried other ports
— Yes, I have ports 27015-27018 open.
— Yes, I have made firewall exceptions. I have also tried setting my router to be a DMZ as well.
— No, i am not using USO/Rocket/or any third party API.
— I am hosting this out of home on my dedicated server computer. This same server computer has a Team Fortress 2 server, a Minecraft server, an ARMA3 server, and a Quake 3 server run on it with no prior issues. I am slightly convinced this is an issue with the game.

I have the full range of 27000-27050 open. I use other ports for fastDLs. I know it’s not an issue with the port or my ISP blocking the port, as I was able to use 27015-27017 with a simple minecraft test server. It was accepting connections, packets from outside of my network and players off of my network. Any other server I run off of my rig is running with no issues as well.

My command.dat currently looks as follows:

The page I assume you’re referring to is for the shortcut method (original), not U3DS nor batch files (newer). Generally speaking, everything you need to know for setting up batch file should be located in the batch file on the commented-out text lines.

A few minutes ago I went and made a fresh server with the U3DS (Unturned Dedicated Server tool, which is just a stripped version of the normal game app & includes the same batch files).

Источник

How to host an Unturned 3 Dedicated Server on Windows

Download SteamCMD here: https://steamcdn-a.akamaihd.net/client/installer/steamcmd.zip SteamCMD commands: login anonymous app_update 1110390 quit …

40 thoughts on “ How to host an Unturned 3 Dedicated Server on Windows ”

It don’t work :/ (Followed along step by step and dubble checked)

it runs but doesn’t run

Bro I canРІР‚в„ўt do it for some reason when I try to extract the zip contents itРІР‚в„ўs not there and when I try to open it it says I need winzip please help IРІР‚в„ўm really dumb and donРІР‚в„ўt know what to do

is this a server which will show up in the ingame server list

My server isn’t working I don’t now why, i followed all the steps already.

still doesn’t work, it should not take all this just to have a custom private lobby for my friends honestly

PLEASE HELP
I create a server, I do not know hoy to do port forward, so I use Hamachi, I am the owner so I put the ipv4 (the one tha gives you hamachi) on the IP slot, about port, I use 27017 But I have tried with 27015 too (I have put «port (and the port)» on the commands), I do not use password, I think I just did everything, but my friends still have isues with finding or enter to the server, they put the information and it just stay on the part that gives you 10 tryes to conect

Guys i did all of the above, and if you want to play with your friends u’ll have to change to ‘LanServer’ not ‘Internet’ one. Also get hamachi, create a network and tell your friends to connect. Then open Unturned, go to connect and put host’s ipv4 adress and ‘27015’ as port. this port worked for me idk. Then ur all set. Hope this works for u

why does my server come on lan when i changed to internet?
and also how do i play with friends

Hi, how to update the server of there comes a update?

FINALLY thank you so much i did another method that took an hour and didnt work thank you so much

Hello and Thank you for the tutorial, however, i do everything that it is shown and the Server does not appear in the Server tab of steam, can Someone please help? And Thank you if you do.

Everything works but.. There is still one problem… When i try to put it on InternetServer it still is on Lan even tho i changed it.. Idk whats going on please help

«Hosting dedicated servers using client files has been deprecated since June 2019.»

Источник

Hosting dedicated servers using client files has been deprecated since june 2019 unturned что делать

Been trying to get a vanilla server running for the past couple of hours, ran into a snag. Even though the default ports are open, no packets are being sent to the server. It’s almost like the server is failing to accept connections. I have my command.dat set appropriately as well. All google searches are coming up with no working solutions, so I thought I’d take to the forums.

I am only able to connect to the server through localhost/the other computers on my home network. No external connections are going through.

— Yes, my IP is static.
— Yes, I have verified that the ports are indeed open and that my ISP is not blocking them
— Yes, I have reinstalled unturned multiple times
— Yes, I have tried other ports
— Yes, I have ports 27015-27018 open.
— Yes, I have made firewall exceptions. I have also tried setting my router to be a DMZ as well.
— No, i am not using USO/Rocket/or any third party API.
— I am hosting this out of home on my dedicated server computer. This same server computer has a Team Fortress 2 server, a Minecraft server, an ARMA3 server, and a Quake 3 server run on it with no prior issues. I am slightly convinced this is an issue with the game.

I have the full range of 27000-27050 open. I use other ports for fastDLs. I know it’s not an issue with the port or my ISP blocking the port, as I was able to use 27015-27017 with a simple minecraft test server. It was accepting connections, packets from outside of my network and players off of my network. Any other server I run off of my rig is running with no issues as well.

My command.dat currently looks as follows:

The page I assume you’re referring to is for the shortcut method (original), not U3DS nor batch files (newer). Generally speaking, everything you need to know for setting up batch file should be located in the batch file on the commented-out text lines.

A few minutes ago I went and made a fresh server with the U3DS (Unturned Dedicated Server tool, which is just a stripped version of the normal game app & includes the same batch files).

Источник