successful ok ignored or substituted attributes mac os epson что делать
Question: Q: Big Sur removed epson printer and now will not add it back
It begins the process of adding it but while ‘setting up EPSON Workforce 610. An error occurred while trying to add the selected device. successful-ok-ignored-or-substituted-attributes’
Anyone with any ideas? Don (11-14-20 13:04 PST)
iMac Pro, macOS 11.0
Posted on Nov 14, 2020 1:06 PM
This worked for me. Thanks!
Posted on Nov 15, 2020 9:18 PM
Helpful answers
I had an issue with my Epson Workforce 320 where it was removed from System Preference and when I tried to add it the Epson software on my Mac would not install, with a dialogue box saying it could not complete installation.
I solved my problem by going to Epson support and downloading the Mac 10.15.x Printer Driver v10.33. I ran that installer and went back to add printer. This time it added the print and all works fine now.
MacOS Big Sur must have altered/broke the Epson software on my Mac.
Nov 15, 2020 7:59 PM
Fj2000, Thank you for sharing that. I solved my problem by doing what you did, going to Epson support and downloading the Mac 10.15.x Printer Driver v10.33 (for Mac 11.0.1 no less), ran the installer, then was successful at adding my printer in Printers and Scanners. So, thank you for sharing what you did, it also worked for me! Don (11-16-20 05:45 PST)
Nov 16, 2020 5:46 AM
There’s more to the conversation
Loading page content
Page content loaded
Temporarily using Gutenprint 5.3.3 driver so I can at least print again. Probably won’t be able to use the scanner till I get an updated Epson driver from Apple. Don (11-14-20 15:23 PST)
Nov 14, 2020 3:24 PM
Will that work for the epson nx420 printer
Nov 15, 2020 2:50 PM
It certainly wouldn’t hurt to try. I didn’t know for sure if it would work for my workforce 610 until I tried, and it worked. So give it a whirl and see, or you could wait for Apple to supply a new Epson driver? Good luck either way. Don (11-15-20 15:08 PST).
Nov 15, 2020 3:08 PM
I had an issue with my Epson Workforce 320 where it was removed from System Preference and when I tried to add it the Epson software on my Mac would not install, with a dialogue box saying it could not complete installation.
I solved my problem by going to Epson support and downloading the Mac 10.15.x Printer Driver v10.33. I ran that installer and went back to add printer. This time it added the print and all works fine now.
MacOS Big Sur must have altered/broke the Epson software on my Mac.
Question: Q: Printer problem mac OS Big Sur
Printing went well on Catalina. Now printing stopped and showed message ‘Filter failed’. Using printer Lexmark C543 and removed and entered the printer once. Same problem. Printer supply is visible in browser. Seems to be OS problem.
MacBook Pro 13″, macOS 10.12
Posted on Nov 14, 2020 3:32 AM
Excellent suggestion! After deleting, adding the same printer and using Generic PostScript Printer printing is again functioning.
Posted on Nov 16, 2020 1:11 PM
Helpful answers
The generally suggested fix for the ‘Filter failed’ problem is to delete the printer and then upload the driver yourself, not let it select from the OS builtin set. However, right now the Lexmark driver site doesn’t allow Big Sur (10.16) as an option for a driver download.
Nov 14, 2020 6:36 AM
Same problem overher with my Lexmark CX310 when i print. Printer receives nothing it even does not even wake up. Tried to install new drivers from Lexmark but this is also resulting in an error so new driver are not installed.
Nov 14, 2020 12:01 PM
After MAC OS Big Sur 11.0.1 installed, computer «unable to locate printer». Help please.
Nov 17, 2020 7:41 AM
My company we run a Canon C5035, we updated all the iMac 2019 and MacBook to OS Big Sur. Now when we print the text comes out as gray squares. This is a monumental problem for our business. Please provide support ASAP
Nov 16, 2020 8:20 AM
This error is showing when trying to add a printer. this never happened in catalina
An error occurred while trying to add the selected device.
Nov 17, 2020 10:48 PM
For Lexmark printers (is what I have. ) just install the same driver for your printer using in the «use» drop menu the Generic PostScript Printer.
Nov 16, 2020 12:38 PM
After the update, my Lexmark MS415dn stopped working, «Filter» Failed. I went to the Lexmark support page, no drivers available for the Big Sur update yet.
Additionally after the update when I purchase postage though PayPal, the label appears blank. If I close the page and select «reprint label, it appears and can be printed on my backup printer made by Epson.
I tried to install monochrome Lexmark printer driver and the installation failed. The only driver available was for OS 10.9, nothing yet for 11.01.
Still working on both issues.
Nov 17, 2020 2:44 PM
There’s more to the conversation
Loading page content
Page content loaded
Having same problem with Lexmark B2238 Mono Laser. Worked perfectly before upgrade to 11.0.1. Updated firmware, reset printing system, restarted iMac and printer. Still get » Filter Failed» message.
Nov 14, 2020 4:36 AM
The generally suggested fix for the ‘Filter failed’ problem is to delete the printer and then upload the driver yourself, not let it select from the OS builtin set. However, right now the Lexmark driver site doesn’t allow Big Sur (10.16) as an option for a driver download.
Nov 14, 2020 6:36 AM
Same problem overher with my Lexmark CX310 when i print. Printer receives nothing it even does not even wake up. Tried to install new drivers from Lexmark but this is also resulting in an error so new driver are not installed.
Nov 14, 2020 12:01 PM
In addtion on my earlier message. My Lexmark CX310 als support airprint so i turned on my WIFI on the Mac and used the airprint protocol and it worked. Amazingly even when i turned off the WIFI on the Mac but still used the airprint protocol it worked.
Nov 15, 2020 1:18 AM
My company we run a Canon C5035, we updated all the iMac 2019 and MacBook to OS Big Sur. Now when we print the text comes out as gray squares. This is a monumental problem for our business. Please provide support ASAP
Nov 16, 2020 8:20 AM
Here’s a fix that worked immediately for me».
Nov 16, 2020 8:26 AM
Here’s a fix that worked immediately for me
Nov 16, 2020 8:27 AM
Just installed Big Sur on my Mac mini 2018.
Tried to print to a Canon Image Class MF 4150 and then to a Brother HL-L2360D printers to no avail.
Had to RESET the Mac printing system to solve a problem.
If you can’t print to your printer and you’ve tried all other solutions, reset the printing system. This process deletes all printers from your list of printers, deletes information about all completed print jobs, and deletes all printer presets.
Important: First, try other troubleshooting techniques in Solve printing problems on Mac.
«iMore re how to reset printing system Mac» which includes screen shots
Question: Q: Printer Driver
Trying to update the printer driver for an Epson Stylus Photo R360 printer to work with OS Big Sur. The Epson compatibility assistant confirms there is a driver available. But on trying to install the printer I get an error message «An error occurred while trying to add the selected device. successful-ok-ignored-or-substituted-attributes» then abandons the installation. Anybody any idea how to get around this please?
Posted on Nov 13, 2020 12:22 PM
I have found the following driver :
Posted on Nov 17, 2020 11:34 PM
Helpful answers
Epson provided a software updater for this printer from June 04, 2019 and claim it is for Catalina. Since Catalina was not introduced until Apple’s WWDC later in that month, this is likely a 32-bit printer solution that is not compatible with Catalina, and certainly not for Big Sur. This is at least a 15 year old device that was retired by Epson long ago, and is not supported by Apple’s AirPrint either.
Time to shop for a new printer that specifically advertises it supports Apple’s AirPrint, so you are not dependent on Epson driver support.
Nov 15, 2020 7:07 AM
There’s more to the conversation
Loading page content
Page content loaded
I have the same problem with the Epson L805 printer. After upgrading to the Big Sur version, the printer returns the error-successful-ok-ignored-or-substitutes-attributes. Can you help me solve the problem? I can’t work((((
Nov 15, 2020 5:33 AM
Nov 15, 2020 5:39 AM
Have you tried deleting the printer and then adding it back? Have you checked Epson website for your model for compatibility?
Nov 15, 2020 6:01 AM
Epson provided a software updater for this printer from June 04, 2019 and claim it is for Catalina. Since Catalina was not introduced until Apple’s WWDC later in that month, this is likely a 32-bit printer solution that is not compatible with Catalina, and certainly not for Big Sur. This is at least a 15 year old device that was retired by Epson long ago, and is not supported by Apple’s AirPrint either.
Time to shop for a new printer that specifically advertises it supports Apple’s AirPrint, so you are not dependent on Epson driver support.
Nov 15, 2020 7:07 AM
Thanks for your reply. but why did he still print on Catalina, but no Big sur?. And if they go back to the previous version of Mojave the problem will be solved? But the computer will work much worse? I don’t know much about it.. and I can’t afford to buy a new printer yet(((
Question: Q: EPSON Stylus Photo 1400 not working in 11.0.1
I have just installed Big Sur, it seems working correctly but the EPSON Stylus Photo 1400 printer.
After the update the printer is no more present in Printers and Scanners, when I try to re add her I get this error message:
The printer used the default Epson driver automagically downloaded by Mac OS
My Samsung printer is still present and working, same for the EPSON Perfection V200 scanner.
Do there is a way to force remove the printer drivers and download them fresh?
Or any other solution?
iMac 27″ 5K, macOS 10.15
Posted on Nov 13, 2020 7:22 AM
Thank you for your help.
Digging trough the forum I discovered this thread https://discussions.apple.com/thread/252035180
Printer Driver v10.33 for MacOS Catalina works fine in Big Sur!
Anyway, I never installed Epson printer driver via Epson site, each and any version of Mac OS up to Catalina downloaded them automagically from Apple when needed.
Posted on Nov 20, 2020 12:14 AM
All replies
Loading page content
Page content loaded
It sounds like your Epson printer isn’t working after the most recent macOS update. We understand how important this is for you and we’re here to help.
This article will walk you through the steps to remove the drivers and reinstall them: How to Uninstall and Reinstall your Mac Printer Driver
If the issue persists, let’s try the same steps in a new user account: Set up users, guests, and groups on Mac
Let us know if the issue persists.
Nov 19, 2020 2:35 PM
If you have solved the problem already, please disregard this message.
«Compatibility details for Epson 1400
Your product is macOS Big Sur compatible. The product driver is available via the Epson support website.
Printer Driver: Please use v10.85 or later.«
This driver cannot (yet) be found on the Epson Stylus Photo 1400 support page. However, a v10.85 driver appears in connection with a number of downloads for other printer models. Others have found that it is often possible to use a driver from another printer’s support page. Just as an example, would the standalone Printer Driver v10.85 at https://epson.com/Support/Printers/All-In-Ones/XP-Series/Epson-XP-530/s/SPT_C11CE81201?review-filter=macOS+11.x#panel-drivers-2-2 possibly work?
Nov 19, 2020 3:43 PM
Thank you for your help.
Digging trough the forum I discovered this thread https://discussions.apple.com/thread/252035180
Printer Driver v10.33 for MacOS Catalina works fine in Big Sur!
Anyway, I never installed Epson printer driver via Epson site, each and any version of Mac OS up to Catalina downloaded them automagically from Apple when needed.
Nov 20, 2020 12:14 AM
Thanks for your report.
Yes, (re)installing a v10.33 driver for Catalina appears to have been one solution in some cases when the 10.85 version has not been directly available from a certain printer’s support page. Others have just downloded a file including the printer driver v10.85 for a different model, and it has worked.
Good to hear that your printer is working now.
Nov 20, 2020 3:58 AM
Question: Q: EPSON Stylus Photo 1400 not working in 11.0.1 More Less
IPP 1.1 | Код состояния successful-ok-ignored-or-substituted-attributes
Код состояния «successful-ok-ignored-or-substituted-attributes» в IPP 1.1 информирует о том, что Запрос выполнен успешно, но некоторые предоставленные атрибуты (1) были проигнорированы или (2) неподдерживаемые значения были заменены поддерживаемыми значениями или были проигнорированы, чтобы выполнить операцию, не отклоняя ее. (раздел B.1.2.2 из RFC 8011)
Неподдерживаемые атрибуты, синтаксисы атрибутов или значения ДОЛЖНЫ быть возвращены в группе «Unsupported attributes» (Неподдерживаемые атрибуты) ответа для всех операций. Из этого правила есть исключение для операций запроса Get-Printer-Attributes, Get-Jobs и Get-Job-Attributes только для атрибута операции «requested-attributes» (требуемые-атрибуты). Когда предоставленные значения атрибута операции «requested-attributes» (запрашиваемые атрибуты) запрашивают атрибуты, которые не поддерживаются, объект IPP ДОЛЖЕН вернуть атрибут операции «requested-attributes» (запрашиваемые атрибуты) в группе ответа «Unsupported Attributes» (неподдерживаемые атрибуты) (только с неподдерживаемыми значениями). (Смотри раздел 4.1.7 и раздел 4.2.1.2 из RFC 8011)
Код состояния «successful-ok-ignored-or-substituted-attributes» в IPP 1.1 относится к классу ответа операции Successful. (раздел B.1.2 из RFC 8011). Другие «Успешные» коды состояния перечислены в таблице.