the filename directory name or volume label syntax is incorrect что делать
«The filename, directory name, or volume label syntax is incorrect» error when you attach a new drive in the backup schedule in Windows Server 2012
Symptoms
Consider the following scenario:
You have a computer that is running Windows Server 2012.
You use the Windows Server Backup utility to back up files to an external drive.
You remove the external drive after the backup is complete.
You try to attach a second drive in the backup schedule. For example, you attach another external drive, and then you run the following command:
In this scenario, you receive an error message that resembles the following:
The filename, directory name, or volume label syntax is incorrect.
Note The placeholder represents the disk identifier number. You can run the wbadmin get disks command to check the disk identifier number, and the output resembles the following:
Disk name: xxxxxxxxxxx
Disk number: x
Disk identifier:
Total space: xxx.xx GB
Used space: xxx.xx GB
Resolution
Hotfix information
A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.
If the hotfix is available for download, there is a «Hotfix Download Available» section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.
Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=supportNote The «Hotfix Download Available» form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.
Prerequisites
To apply this hotfix, you must be running Windows Server 2012.
Registry information
To use the hotfix in this package, you do not have to make any changes to the registry.
Restart requirement
You must restart the computer after you apply this hotfix.
Hotfix replacement information
This hotfix does not replace a previously released hotfix.
What are possible reasons for java.io.IOException: «The filename, directory name, or volume label syntax is incorrect»
I am trying to copy a file using the following code:
For some users the targetFile.createNewFile results in this exception:
Filename and directory name seem to be correct. The directory targetPath is even checked for existence before the copy code is executed and the filename looks like this: AB_timestamp.xml
The user has write permissions to the targetPath and can copy the file without problems using the OS.
As I don’t have access to a machine this happens on yet and can’t reproduce the problem on my own machine I turn to you for hints on the reason for this exception.
13 Answers 13
This can occur when filename has timestamp with colons, eg. myfile_HH:mm:ss.csv Removing colons fixed the issue.
Try this, as it takes more care of adjusting directory separator characters in the path between targetPath and filename:
I just encountered the same problem. I think it has to something do with write access permission. I got the error while trying to write to c:\ but on changing to D:\ everything worked fine. Apparently Java did not have permission to write to my System Drive (Running Windows 7 installed on C:)
Here is the test program I use
Take a look at the comment in the Exception and try to vary all the elements in the path name of the file. Experiment. Draw conclusions.
Do you check that the targetPath is a directory, or just that something exists with that name? (I know you say the user can copy it from the operating system, but maybe they’re typing something else).
Does targetPath end with a File.separator already?
(It would help if you could log and tell us what the value of targetPath and filename are on a failing case)
Maybe the problem is that it is copying the file over the network, to a shared drive? I think java can have problems when writing files using NFS when the path is something like \mypc\myshared folder.
What is the path where this problem happens?
Try adding some logging to see exactly what is the name and path the file is trying to create, to ensure that the parent is well a directory.
In addition, you can also take a look at Channels instead of using a loop. 😉
Neither createNewFile or createFileExclusively are synchronized when I look at the OpenJDK source, so you may have to synchronize this block yourself.
Maybe the file already exists. It could be the case if your timestamp resolution is not good enough. As it is an IOException that you are getting, it might not be a permission issue (in which case you would get a SecurityException).
I would first check for file existence before trying to create the file and try to log what’s happening.
Look at public boolean createNewFile() for more information on the method you are using.
As I was not able to reproduce the error on my own machine or get hands on the machine of the user where the code failed I waited until now to declare an accepted answer. I changed the code to the following:
After that it worked for the user reporting the problem.
I yet have to talk that user into helping me verifying that the code change fixed the error (instead of him doing something differently) by running the old version again and checking if it still fails.
OSError: [WinError 123] The filename, directory name, or volume label syntax is incorrect #3584
Comments
njzjz commented Jul 1, 2019 •
Actual Behavior
Expected Behavior
Steps to Reproduce
Output of conda info
The text was updated successfully, but these errors were encountered:
nick-youngblut commented Sep 19, 2019
I seem to be running into this issue with my lasagne package recipe:
marcelotrevisani commented Sep 19, 2019
Could you please share the recipe?
marcelotrevisani commented Sep 19, 2019
Or a minimum example to reproduce it
nick-youngblut commented Sep 19, 2019
Just follow the link in my last post or go straight to the build
njzjz commented Sep 26, 2019
I seem to be running into this issue with my lasagne package recipe:
jjhelmus commented Sep 27, 2019
skip: True # [py37] will not work since there is no py37 pre-processor selector. Use skip: True # [py==37] as suggested on the linked documentation page.
seanyen commented Oct 11, 2019
I hit the same problem in my recipe. Here is the error message:
dhirschfeld commented Nov 3, 2019
This is happening in the wsproto feedstock
conda-forge/wsproto-feedstock#6
astrofrog commented Nov 15, 2019
astrofrog commented Nov 15, 2019
Ok in my case it was because I had python >=3.5 in the recipe. It would be nice if the linter could warn about not doing this?
The filename, directory name, or volume label syntax is incorrect (0x8007007B) – System Restore error
The error message The filename, directory name, or volume label syntax is incorrect with error code 0x8007007B is one of the System Restore errors you might encounter when you attempt to carry out a System Restore operation on your Windows 10 device. This error pops up when exiting the System Restore applet after you must have manually created a restore point. In this post, we will identify the potential cause of this error as well as provide the most suitable solution you can try to successfully resolve the issue.
When you encounter this issue. you’ll receive the following full error message;
System Restore
There was an unexpected error:
The filename, directory name, or volume label syntax is incorrect.
(0x8007007B)
Please close System Restore and try again.
The filename, directory name, or volume label syntax is incorrect (0x8007007B)
This error occurs because the system is set to place a restore point to an invalid path or location.
A disk that is valid for a restore point must meet the requirements below.
A restore point might take up as much as 15% of the total available space available on each disk, but it will delete old restore points if it is necessary in order to make room for the new restore point.
So, if you’re faced with this issue, to resolve it, you need to set the Restore Point to a valid path.
You can now create a restore point and see if the error still occurs.
If the issue is resolved, other Available Drives can be selected if they appear to be valid (with a graphic icon).
If you intend to protect all Available Drives, it is recommended that you add only one disk at a time and test System Restore until you have determined which of the listed Available Drives is not valid.
Hope you find this post helpful!
Date: December 14, 2020 Tags: System Restore
Why do I get error «The filename, directory name, or volume label syntax is incorrect» using netsh set route?
On a windows7 machine I was trying to set the standard gateway following this example:
which returned the following error:
Why is that the case, and how can I fix set the standard gateway for my connections?
4 Answers 4
There’s some kind of an «underlying name» to the interface, set up on its 1st creation, or when it’s manually changed. You can get it using:
It might be different from what you see in the GUI window or from running netsh interface show interface
I just had a similar same issue. The problem was the » character. I copied the netsh from a word document I got from our software vendor and pasted that directly into the CMD and changed the needed parts which failed with the error mentioned here. However when I copied the string at first to notepad and replaced one from the » I discovered that they are different, so I replaced both / re-typed both and the issue is solved now.
Apparently on Windows 7, you need to use a different syntax to execute the command in the correct context. Preface the context specifiers interface ipv4 with a -c parameter and quote the entire context specifier. For example, to set the adapter to DHCP:
Not the answer you’re looking for? Browse other questions tagged windows-7 networking or ask your own question.
Related
Hot Network Questions
Subscribe to RSS
To subscribe to this RSS feed, copy and paste this URL into your RSS reader.
site design / logo © 2021 Stack Exchange Inc; user contributions licensed under cc by-sa. rev 2021.11.12.40742
By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.